How to Set Up Netgear Nighthawk Mesh WiFi 6 System AX1800

It is easy setting up the Netgear Nighthawk Mesh WiFi 6 System AX1800. If you are buying new one or want to setup your existing system, then you need to follow a right guide to setup. In this guide, you will explore how to setup Netgear Nighthawk Mesh WiFi 6 System AX1800 at home. Let’s start:

Easy Steps to Setup Nighthawk Mesh WiFi 6

Below, we provide easy step-by step instruction to setup the Nighthawk Mesh system, follow every step carefully.

Step 1: Unpack the Router

• Take the router, satellite, power adapters, and Ethernet cords out of the box.
• Before you start, make sure you have everything you need.
• Put the router and satellite nodes optimally where you want them to deliver the best signals.

2. Turn on the main router.

• Plug the main router into a wall outlet and use the Ethernet wire that came with it to connect it to your modem.
• For the best range, put the router in the middle of the room.
• Wait until the lights on the router stop flashing. This means it’s ready to be set up.

3. Connect the satellite nodes.

• Connect the satellite nodes to places where you need more service.
• These need to be put in places with weak Wi-Fi that are still close to the main router.
• Wait for the lights on the satellite nodes to settle. This means they are on and ready to sync.

4. Join the Wi-Fi network

• Go to the Wi-Fi settings on your computer.
• Use the password on the router label to connect to the NETGEAR_xxxx network, which is the usual Wi-Fi name.
• After you’re linked, you can go to the setup page to keep setting up your Wi-Fi.

5. Go to the page for setting up

• Open an online browser and type routerlogin.net into the address bar.
• Try 192.168.1.1 or 192.168.0.1 if that doesn’t work.
• This will take you to the page where you can log in and set up your router.

6. Go to the router and log in.

• To get to the settings, go to the login page and enter the usual username and password, which are admin.
• Use your own login information if you’ve changed these before.
• You’ll be asked to finish the setup process and set up your Wi-Fi network after logging in.

7. Choose a name and password

• You will be asked to make your own Wi-Fi name (SSID) and password.
• To protect your network, make sure you use a strong password.
• These settings will be saved by the router and used by your Wi-Fi network.

8. Down-load the Nighthawk app (not required but suggested).

• Get the Nighthawk app from the App Store or Google Play Store to make setting up even easier.
• The app will show you how to do it step by step and find your router on its own.
• The app will also show you a picture of your network and help you sync your router with satellite nodes.

9. Synchronize the Satellite Nodes

• The satellite nodes need to be sync with the main router.
• The app or the online interface will let you do this.
• To guarantee best placement for a smooth network, follow the instructions to sync every satellite node to the main router.

10. Reconnect the Wi-Fi and devices.

• Once the satellites are in sync, connect your devices back to the new Wi-Fi.
• Apply the name of the network and password you established previously.
• Check the signal in different parts of your house to ensure you have faster coverage in every room.

11. Network Settings

• You may change advance settings via the Nighthawk app or the web interface if you wish to further improve your Wi-Fi.
• This covers speed testing, guest network creation, and parental control configuration.
• These options let you maximize your Netgear Nighthawk AX1800 system.

Final thoughts

Installing the Netgear Nighthawk Mesh WiFi 6 System AX1800 is easy and direct. Follow these eleven instructions will give you a completely optimize Wi-Fi network covering your whole house. Even in crowded settings, Wi-Fi 6 technology will enable your devices to run quicker with more stability.