Nighthawk AX3000 Mesh Setup: A Step by Step Guide

The Nighthawk AX3000 mesh system consists of the main router and all the rest are child nodes (satellites). These devices work together and provide high-speed internet signal throughout your home.
In this blog, we discuss the setup of Nighthawk AX3000 mesh system at home. If you also want to setup your mesh system, then read the entire blog properly.

Steps to Nighthawk Mesh Setup

To begin, you need to install the all mesh devices physically. Follow the steps given below:

• First of all, unpack the mesh devices, and put out the router and at mid location of the house
• After that attach the router to the modem. (Make sure the modem is turn off during connection)
• Then connect the power adapter to the router and give power to both the router and modem.
• At last place the child nods (satellites) to the place where the router don’t able to reach the signals.
• Use the Ethernet cable to connect the router and satellites together. After install all the devices you need to perform Netgear Nighthawk mesh Login process

Configure the Nighthawk AX3000 Mesh

To configure the mesh system, you can use the any one method from Web Browser and Mobile. Below we discuss about both methods in detail.

By Web Browser

• Firstly make a connection between router and computer wirelessly or by Ethernet cable.
• Then go to the web browser and visit the routerlogin.com or 192.168.1.250 by typing it address bar.
• A login window will open; use the label and user manual to check the login credential.
• Now you will comes to the dashboard of the router after performing the login process.



• On this dashboard use the onscreen instruction and tab to setting up the router.

Through Mobile App

• Attach the mobile device to the default network of the router.
• To use the Mobile app to configure the mesh devices, download the Nighthawk app from any platform like Google Play store and App Store.
• Then install it on the mobile, and open it. And it will ask for the login detail.
• Same as above use the label and user manual to login to the Nighthawk mobile app.
• Then choose the location where you establish the router, and also enter the serial number and model of the router.
• Now the app will start to pair the router, this way you can configure all the mesh devices into by the app.

Conclusion

In the above blog, you explore the complete guide that helps you to setup the Nighthawk AX3000 mesh system by using two simple methods.